Tensorgrip P300 High Temp General Contact Adhesive

Tensorgrip® P300 High Temp General Contact Adhesive comes in a 21.9 ounce can and is a standard non-flammable solvent contact adhesive with good temperature resistance. Designed to deliver a smooth and strong bond in nearly any application. As part of Tensorgrip's INDUSTRIAL range, P300 is a web spray adhesive designed for use in applications using the following substrates: Insulation, carpet, standard laminate, and foam.

!! This item cannot ship USPS !! If USPS is chosen when ordering this item you will be contacted for alternate arrangements !!

Directions for use

• TensorGrip P300 is designed as a portable, self contained spray system for field or shop applications.
• Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
• Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
• Parts should be mated with as much pressure as practical.
• Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.
• Canister system will spray adequately above 60º F.
• Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
• Notice!!! Do not store at temperatures over 120º F.

Sold individually.

Bulk purchase discounts when buying:

• 12-59 cans
• 60+ cans

Key Features: Tensorgrip P300 High Temp General Contact Adhesive

• Fast, high tack.
• Excellent green strength and high heat resistance (over 220°F/105°C).
• Fast drying with long open time.
• Excellent high coverage.

Specifications: Tensorgrip P300 High Temp General Contact Adhesive