Tensorbond LB28 High-Temp Contact Adhesive

Tensorbond LB28 High-Temp Contact Adhesive is a flammable brush grade contact adhesive with high temperature resistance. Designed for bonding standard laminate to MDF and other common substrates in commercial cabinetry. Formulated to be brushed on or rolled on. Available in 5 gallon pails.

!! This item only ships via FedEx !! estimates may be incorrect for this reason !!

Directions For Use

• Apply to both surfaces to be bonded by brushing or rolling adhesive on.
• Allow to dry (2-4 minutes or until dry to the touch) parts should be mated under pressure.
• Apply pressure with a hand laminate roller or nip roller. Bonds should be made as soon as is practical.
• If adhesive is left to dry for over 20 minutes, parts should be recoated.
• Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately although ultimate strength is achieved in 1-3 days.

Handling and Storage

• Consult Safety Data Sheet prior to use.
• Do not store at temperatures over 120 °F/50 °C.
• Avoid exposure to direct sunlight.
• Do not store directly on concrete floor.
• Always store above 60°F/15°C
• When connected, keep valve open and hose pressurized at all times.
• Always test our adhesives to determine suitability for your particular application prior to use in production.

Sold individually.

!! This item only ships via FedEx !! estimates may be incorrect for this reason !! 

Key Features: Tensorbond LB28 High-Temp Contact Adhesive

• High Heat Resistance.
• No ODS (Ozone Depleting Substances).
• Fast Drying.
• Versatile Adhesive, bonding to most any surface.
• Excellent Green Strength.

Specifications: Tensorbond LB28 High-Temp Contact Adhesive