Tensorgrip P300 High Temp General Contact Adhesive

Tensorgrip® P300 is a standard non-flammable solvent contact adhesive with good temperature resistance. Designed to deliver a smooth and strong bond in nearly any application. As part of Tensorgrip's INDUSTRIAL range, P300 is a web spray adhesive designed for use in applications using the following substrates: Insulation, carpet, standard laminate, and foam.

For a more aggressive adhesive to adhere to porous substrates, check out our listing for the Tensorgrip® F80 Adhesive!

!! This item cannot ship USPS !! If USPS is chosen when ordering this item you will be contacted for alternate shipping arrangements !!

Advantages

• Fast, high tack
• Excellent green strength and high heat resistance (over 220°F/105°C)
• Fast drying with long open time
• Excellent high coverage

DIRECTIONS FOR USE

• TensorGrip P300 is designed as a portable, self contained spray system for field or shop applications.
• Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
• Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
• Parts should be mated with as much pressure as practical.
• Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.
• Canister system will spray adequately above 60º F. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
• Notice!!! Do not store at temperatures over 120º F.

Canister Storage/Changeover

• If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister. Close and lock the spray gun.
• To change or disconnect canister: turn canister valve to the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.
• Reconnect the spray hose to a new canister of adhesive. OR if you are NOT connecting to a new canister, connect hose to canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.

Chemical Technical Data

• Total Solids: 22-28%
• VOC Content: 160.5 g/L
• Color: Clear or Red
• Flammability: Non-Flammable adhesive; Flammable propellant
• Solvent: Methylene Chloride
• Dry time: 3-5 mins dependent on temp & humidity
• Open time: Long
• Shelf Life: 18 months from date of manufacture

!! This item cannot ship USPS !! If USPS is chosen when ordering this item you will be contacted for alternate shipping arrangements !!